Klon Centaur Overdrive Effect (1997)
LOADING IMAGES
Klon Centaur Model Overdrive Effect (1997), made in Massachusetts, serial # 1595, Gold enamel finish.
A pedal that needs very little introduction, this is perhaps the most infamous and coveted of any stompbox on Earth: The Klon Centaur.
In the early 90's, engineer Bill Finnegan wanted to capture the magic of an amp at high volume and contain it in a pedal for guitarists to access the glistening harmonics and rich distortion at their feet. After years of trial and error with his friends in the world of engineering, Finnegan struck gold (literally) with his simple but perfect circuit featuring germanium diodes and began selling the first Klon in 1994.
The pedal was custom made and handled by just one man from start to finish, from the sand-cast chassis to the knobs to the signature epoxy cover protecting Finnegan's coveted hand-soldered circuit. Bill's consummate relationship to the Klon operation included all aspects of the business which eventually became too much for Finnegan. He closed the company due to manufacturing costs and unsustainability in 2008. Around 8,000 Klons had been made up to that point. He subsequently made a handful more later on to raise money for a close friend.
The Klon is known best as an "uncolored" clean boost that adds dimension and depth to a guitar's tone without altering it drastically. The IC MAX1044 chip inside allows the pedal to survive and thrive at higher voltages before breaking up. However, the little gold box still excels as a drive thanks to the clipping of those carefully curated two germanium diodes. The gain knob is a double pot which marries the signals of the clipping and clean before sending them to be treated by the remainder of the circuit.
The Klon pedals were highly desired but due to the rigors of production they were often upsold at increasingly astronomical prices through the years due to high demand and short supply. Famous users of this legendary pedal include tone gurus like John Mayer, Joe Perry, and Jeff Beck among many others. Immeasurably long, though, is the list of guitarists with one of the many Klon clones that seem to have become a required offering of any pedal company. These days, collectors and critics argue over the desirability of the length of the eponymous Centaur's tail! When Finnegan reissued the Klon in the form of the more affordable KTR Klon in 2014, the crimson enclosure famously bears his lament: "The ridiculous hype that offends so many is not of my making!"
Length is 5 in. (12.7 cm.), 6 5/8 in. (16.8 cm.) width, and 2 in. (5.1 cm.) in depth at deepest point.
This is a delightfully clean example of perhaps the most famous "holy grail" pedal of all, with minimally worn gold and unmarred crimson detail. The serial number within is clean and legible, and the circuit rests peacefully and unaltered under that unmarred sea of black epoxy Finnegan poured to protect his secrets. The pedal does not come with the original packaging, but included is a small adapter to make a standard 9V adapter work. Excellent Condition.
A pedal that needs very little introduction, this is perhaps the most infamous and coveted of any stompbox on Earth: The Klon Centaur.
In the early 90's, engineer Bill Finnegan wanted to capture the magic of an amp at high volume and contain it in a pedal for guitarists to access the glistening harmonics and rich distortion at their feet. After years of trial and error with his friends in the world of engineering, Finnegan struck gold (literally) with his simple but perfect circuit featuring germanium diodes and began selling the first Klon in 1994.
The pedal was custom made and handled by just one man from start to finish, from the sand-cast chassis to the knobs to the signature epoxy cover protecting Finnegan's coveted hand-soldered circuit. Bill's consummate relationship to the Klon operation included all aspects of the business which eventually became too much for Finnegan. He closed the company due to manufacturing costs and unsustainability in 2008. Around 8,000 Klons had been made up to that point. He subsequently made a handful more later on to raise money for a close friend.
The Klon is known best as an "uncolored" clean boost that adds dimension and depth to a guitar's tone without altering it drastically. The IC MAX1044 chip inside allows the pedal to survive and thrive at higher voltages before breaking up. However, the little gold box still excels as a drive thanks to the clipping of those carefully curated two germanium diodes. The gain knob is a double pot which marries the signals of the clipping and clean before sending them to be treated by the remainder of the circuit.
The Klon pedals were highly desired but due to the rigors of production they were often upsold at increasingly astronomical prices through the years due to high demand and short supply. Famous users of this legendary pedal include tone gurus like John Mayer, Joe Perry, and Jeff Beck among many others. Immeasurably long, though, is the list of guitarists with one of the many Klon clones that seem to have become a required offering of any pedal company. These days, collectors and critics argue over the desirability of the length of the eponymous Centaur's tail! When Finnegan reissued the Klon in the form of the more affordable KTR Klon in 2014, the crimson enclosure famously bears his lament: "The ridiculous hype that offends so many is not of my making!"
Length is 5 in. (12.7 cm.), 6 5/8 in. (16.8 cm.) width, and 2 in. (5.1 cm.) in depth at deepest point.
This is a delightfully clean example of perhaps the most famous "holy grail" pedal of all, with minimally worn gold and unmarred crimson detail. The serial number within is clean and legible, and the circuit rests peacefully and unaltered under that unmarred sea of black epoxy Finnegan poured to protect his secrets. The pedal does not come with the original packaging, but included is a small adapter to make a standard 9V adapter work. Excellent Condition.