Fender Princeton Reverb AA1164 Tube Amplifier (1968)
LOADING IMAGES
End of Summer Sale - PRICE REDUCED!
This item has been sold.
Item # 11370
Prices subject to change without notice.
Fender Princeton Reverb AA1164 Model Tube Amplifier (1968), made in Fullerton, California, serial # A-19486, black tolex covering finish.
The Fender amplifier lineup saw some distinct cosmetic changes following the now classic black-panel period as the '60s wound down. The new blue-on-metallic front panel appeared in late 1967 and persisted well through the '70s while the silver trim surrounding the silver/aqua-stripe grille cloth (nicknamed "drip edge") proved a short-lived feature. CBS had just acquired Fender a few years prior and although changes were already affecting many Fender instruments, the amplifiers retained their mid-60's circuits underneath the new exterior up until around the turn of the decade. This, a late 1968 Princeton Reverb still runs the AA1164 circuit of the earlier black panel Princetons. This comparatively rare transitional version was only in production for about a year before the CBS engineers stated making changes that in retrospect nobody wanted!
Height is 16 in. (40.6 cm.), 19 3/4 in. (50.2 cm.) width, and 9 1/2 in. (24.1 cm.) deep.
Externally this amplifier is in excellent condition. The black Tolex covering is well preserved with minimal sings of wear. The faceplate has some scuffing, particularly around the input jacks and some light staining around the tremolo controls, but overall in good shape and all the stenciled lettering is still intact. The plastic Fender logo is present and the grille cloth is remarkably well-preserved with no notable tearing. The chassis straps and handle hardware shows very minor signs of corrosion but overall remain in good shape. The amp retains its original footswitch for reverb and vibrato as well.
Electrically, the amp is also nicely original. After 1967 the tube chart on these amps was no longer stamped with a date code but the serial number dates the amp to around late 1968. The cabinet houses a 10" Oxford 10L5-1 speaker. The power, output and reverb transformers are original to the amp and are marked 831-6751, 606-625, and 831-6726, respectively, all dating between the 25th week of 1966 and the 51st week of 1967. Pots date between early 1966 and early 1967. The amp has received our typical maintenance and servicing, including replacement of all electrolytic capacitors, cleaning of all sockets, pots and jacks, a new grounded three-prong power cord installed and biased to spec. Overall this is a super example of this "CBS but still the Bes'" of great recording and gigging combo amps. Excellent Condition.
The Fender amplifier lineup saw some distinct cosmetic changes following the now classic black-panel period as the '60s wound down. The new blue-on-metallic front panel appeared in late 1967 and persisted well through the '70s while the silver trim surrounding the silver/aqua-stripe grille cloth (nicknamed "drip edge") proved a short-lived feature. CBS had just acquired Fender a few years prior and although changes were already affecting many Fender instruments, the amplifiers retained their mid-60's circuits underneath the new exterior up until around the turn of the decade. This, a late 1968 Princeton Reverb still runs the AA1164 circuit of the earlier black panel Princetons. This comparatively rare transitional version was only in production for about a year before the CBS engineers stated making changes that in retrospect nobody wanted!
Height is 16 in. (40.6 cm.), 19 3/4 in. (50.2 cm.) width, and 9 1/2 in. (24.1 cm.) deep.
Externally this amplifier is in excellent condition. The black Tolex covering is well preserved with minimal sings of wear. The faceplate has some scuffing, particularly around the input jacks and some light staining around the tremolo controls, but overall in good shape and all the stenciled lettering is still intact. The plastic Fender logo is present and the grille cloth is remarkably well-preserved with no notable tearing. The chassis straps and handle hardware shows very minor signs of corrosion but overall remain in good shape. The amp retains its original footswitch for reverb and vibrato as well.
Electrically, the amp is also nicely original. After 1967 the tube chart on these amps was no longer stamped with a date code but the serial number dates the amp to around late 1968. The cabinet houses a 10" Oxford 10L5-1 speaker. The power, output and reverb transformers are original to the amp and are marked 831-6751, 606-625, and 831-6726, respectively, all dating between the 25th week of 1966 and the 51st week of 1967. Pots date between early 1966 and early 1967. The amp has received our typical maintenance and servicing, including replacement of all electrolytic capacitors, cleaning of all sockets, pots and jacks, a new grounded three-prong power cord installed and biased to spec. Overall this is a super example of this "CBS but still the Bes'" of great recording and gigging combo amps. Excellent Condition.